You are here: Home » Product Categories » Pipe Standards
HOT PRODUCT
  • API 5L(SMLS)
    Keywords:API 5l pipe, API 5L line pipe, smls pipe, cs pipe, ms pipeGrades:B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS)Sizes:OD: 73-630mm, WT: 6-35mm,LENGTH: 5.8/6/11.8/12mSteel Pipe Dimensions OD:1/2” to 2”, 3”, 4”, 6”, 8”, 10”, 12”, 16 inch, 18 inch, 20 inch, 24 inch, 26 inch to 40 inch.Schedule: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160Ends Type:Beveled ends, Plain endsLength Range: 20 FT (6 meter), 40FT (12 meter)or customizedSurface:Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc
  • API 5L(Welded)
    Specificaions: Gr. B, X42, X52, X60, X65, X70, X80, EN10219:S275JRH, S275J0H, S275J2H, S355JRH, S355J0H, S355J2H, ASTM A671: CL10-CL13:CA55, B65, B70, C70.Size:1/2” to 60”Range of Thickness: SCH10 to SCH160Manufacturing types: ERW, LSAW, SSAWEnds:2"below plain ends,2" above beveled ends, threaded ends availableSurface:Natural, Varnished, Black painting, 3PE, FBE, etcPacking:Black coating ,bevel ,caps or as customer’s requirements
  • A53 Pipe
    Keywords:a53 pipe, a53 smls pipe, astm a53 steel pipeSchedules:sch10 -sch160, STD, XH and XXHSize:1/2''-36"inchGrade:A,B,CEnds:Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded EndsSurface:Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive CoatingPacking:Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped
  • A106 Pipe
    Keywords:a106 seamless pipe,a106 line pipe,astm a106 pipe, sa106 pipeSizes:NPS 1/8″ to NPS 48”, Wall thickness: Schedules 10 through 160, STD, XS, XXS.Grade:A,B,CEnds:Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded EndsSurface:Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive CoatingPacking:Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped
  • A179 Pipe
    Types:Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser TubeSizes : O.D.: 6.0~114.0; W.T.: 1~15; L: max 12000Diameter : 0.35mm to 6.35mm OD in thickness ranging from 0.1mm to 1.2mmSchedule : SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All SchedulesWall Thickness:SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS DIN, JIS standard thicknessEnds:Annealed, Pickling, PolishedSurface:Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive CoatingPacking:Waterproof Paper Wrapped, Packed in Wooden Cabins
  • A210 Pipe
    Types:Seamless Medium-Carbon Steel Boiler and Superheater Tubes.Sizes:OD:1/2in-5in(12.7-127mm),WT: 0.035in-0.500in(0.9-12.7mm)Grade:ASTM A210 Grade A1, ASTM A210 Grade CEnds:Annealed, Pickling, PolishedHeat Treatment:Hot-finished tubes need not be heat treated. Cold- finished tubes shall be given a subcritical anneal, a full anneal, or a normalizing heat treatment after the final cold finishing process.
    Surface:Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive CoatingPacking:Waterproof Paper Wrapped, Packed in Wooden Cabins
  • A213 Pipe(Alloy steel&Stainless steel)
    Keywords:a213 stainless pipe,a213 alloy pipe, astm213 pipe,a213 tubingsStainless steel:Material (ASTM):201 304 304L 309s 310s 316 316L 316TI 317L 321 904L S32205Size:Wall thickness 1.24 - 59.54 mm (SCH5S-XXS),Outer diameter 10.3 - 1219mm (1/8""- 48"")"Surface:Pickling , Polished , Hairline , Mirror Type:hot rolled ,cold rolled / cold drawn Alloy steel:Grade:T2, T5, T9, T11, T12, T91, T92Size:"Outside Diameter: 4 -127mm,Wall Thickness: 0.4-12.7mm,Length: 32m Max."Schedules:Schedules 40 through 160, STD, XS, XXS. Form :Round, Square, Rectangular, Hydraulic EtcLength :Single Random, Double Random & Cut Length.
  • A312 Pipe
    Type:Seamless or WeldedMaterial:(ASTM)201 304 304L 309s 310s 316 316L 316TI 317L 321 904L S32205Standard:ASTM AISI DIN JIS GB ENSize:Wall thickness 1.24 - 59.54 mm (SCH5S-XXS),Outer diameter10.3 - 1219mm (1/8"- 48")Ends:Annealed, Pickling, PolishedSurface:Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive CoatingPacking:Waterproof Paper Wrapped, Packed in Wooden Cabins
  • A333 Pipe
    Specifications:ASTM A333,ASME SA333sizes:1/2” Nominal to36”O.D.Wall Thickness – Schedule 10 through XXS,Thickness 3-12mmSchedules:SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All SchedulesTypeSeamless / ERW / Welded / FabricatedStandardsASTM, ASME and APIGrade:A333 GR 1-11Form:Round, Hydraulic EtcPipe Craft:Cold rolled and Cold drawnPipe Length:Min 3 Meters, Max18 Meters, or according to customer’s requirementPipe Tolerance:Cold drawn pipe: +/-0.1mm,Cold rolled pipe: +/-0.05mmEnd:Plain End, Beveled End, Treaded
  • A335 Pipe
    Sizes:NPS 1/2” to NPS 40”Wall Thickness – Schedules 10 through 160, STD, XS, XXS.Grade:P1, P2, P3, P9, P11,P12, P22, P91,P92Surface:oiled, black painted to prevent rustLength:6 meters, 12 meters or customized.Pipe End:Beveled,Square,Threaded,Threaded and Coupled,GroovedASTM Standards:ASTM A 335, and ASME SA 335Pipe Form:Round, Rectangular, Square, Hydraulic Etc.Length:Single, Double Random & Cut to Length.Suitable Pipe Fittings material:A234 WP5
  • A358 Pipe
    Grades:304, 304L, 310S, 316, 316L, 316H, 317L, 321, 321H, 347, 347H, 904LSize:OD1/2"-36"Wall thickness:SCH10,20,30,STD,40,60,XS,80,100,120,140,160,XXSClasses(CL):CL1, CL2, CL3, CL4, CL5Pipe Ends:Plain Ends / Beveled EndsSpecification:ASTM A358 / ASME SA358Finish:No.1 Pickled Finish, No.4 finish, BA Finish, Electropolished Seamless PipeLength:Up to 6 meters, custom cut lengthsProcess Method:ERW , EFW etc
  • A500 Pipe
    Type:carbon steel, cold formed welded and seamless structural tubeSizes:1/2” Nominal to36”Wall thickness:SCH10,20,30,STD,40,60,XS,80,100,120,140,160,XXSGrade:GradeA,GradeB,GradeC,GradeDForms:round, square, rectangular, and “special” shapesSurface Treatment:Plain, oiled, painted, galvanized, electro-static coating and so on.End:Plain End, Beveled End, TreadedLength:Single Random, Double Random & Required Length, Custom SizeUsage:StructuraSupports,Building columns,Highway Signs,Oil Field Services,Communication Towers
  • A671/672 Pipe
    Specification:Plain Carbon steel grades:CA 55, CB 60,CB 65,CB 70 CC 60,CC 65,CC 70Nickel steel grades:CF 65,CF 70,CF 65,CF 70Alloy steel grades:CJA 115, CJB 115,CJE 115,CJF 115,CJH 115,CJP 115"Sizes:O.D:1/2"-40"(21..3-1016mmWall thickness:SCH10,20,30,STD,40,60,XS,80,100,120,140,160,XXSCLASS:10, 11, 12, 13, 20, 21, 22, 23, 30, 31, 32, 33, 40, 41, 42Coating:Epoxy Coating / Colour Paint Coating / 3LPE Coating.Standards:ASTM A671 /ASME SA671,ASTM A672 /ASME SA672Length:Single Random, Double Random & Required Length, Custom SizeTypes:ASTM A 672 GR. B55,B60,B65,B70,C55,C60,C65,C70

HOT PRODUCT

QUICK LINKS

CONTACT US

  Hunan Gaoxing Steel Development Zone, No.1888 Purui South Rd, Wangcheng District,Changsha, Hunan, China

  0086-187-7406-7534

  inquiry@threewaysteel.com

Copyright  2020 Threeway Steel Co.,Ltd. All Rights Reserved

PRODUCT INQUIRY