You are here: Home » Products
HOT PRODUCT
  • API 5L(SMLS)
    Keywords:API 5l pipe, API 5L line pipe, smls pipe, cs pipe, ms pipe
    Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS)
    Sizes:OD: 73-630mm, WT: 6-35mm,LENGTH: 5.8/6/11.8/12m
    Steel Pipe Dimensions OD: 1/2” to 2”, 3”, 4”, 6”, 8”, 10”, 12”, 16 inch, 18 inch, 20 inch, 24 inch, 26 inch to 40 inch.
    Schedule: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160
    Ends Type: Beveled ends, Plain ends
    Length Range: 20 FT (6 meter), 40FT (12 meter)or customized
    Surface: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc
  • API 5L(Welded)
    Specificaions: Gr. B, X42, X52, X60, X65, X70, X80, EN10219:S275JRH, S275J0H, S275J2H, S355JRH, S355J0H, S355J2H, ASTM A671: CL10-CL13:CA55, B65, B70, C70.
    Size:1/2” to 60”
    Range of Thickness: SCH10 to SCH160
    Manufacturing types: ERW, LSAW, SSAW
    Ends: 2"below plain ends,2" above beveled ends, threaded ends available
    Surface:Natural, Varnished, Black painting, 3PE, FBE, etc
    Packing:Black coating ,bevel ,caps or as customer’s requirements
  • A53 Pipe
    Keywords:a53 pipe, a53 smls pipe, astm a53 steel pipe
    Schedules:sch10 -sch160, STD, XH and XXH
    Size:1/2''-36"inch
    Grade:A,B,C
    Ends:Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends
    Surface:Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating
    Packing:Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped
  • A106 Pipe
    Keywords:a106 seamless pipe,a106 line pipe,astm a106 pipe, sa106 pipe
    Sizes:NPS 1/8″ to NPS 48”, Wall thickness: Schedules 10 through 160, STD, XS, XXS.
    Grade:A,B,C
    Ends:Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends
    Surface:Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating
    Packing:Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped
  • A179 Pipe
    Types: Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tube
    Sizes : O.D.: 6.0~114.0; W.T.: 1~15; L: max 12000
    Diameter : 0.35mm to 6.35mm OD in thickness ranging from 0.1mm to 1.2mm
    Schedule : SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
    Wall Thickness:SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS DIN, JIS standard thickness
    Ends: Annealed, Pickling, Polished
    Surface: Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating
    Packing: Waterproof Paper Wrapped, Packed in Wooden Cabins
  • A210 Pipe
    Types:Seamless Medium-Carbon Steel Boiler and Superheater Tubes.
    Sizes:OD:1/2in-5in(12.7-127mm),WT: 0.035in-0.500in(0.9-12.7mm)
    Grade: ASTM A210 Grade A1, ASTM A210 Grade C
    Ends: Annealed, Pickling, Polished
    Heat Treatment: Hot-finished tubes need not be heat treated. Cold- finished tubes shall be given a subcritical anneal, a full anneal, or a normalizing heat treatment after the final cold finishing process. Surface: Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating
    Packing: Waterproof Paper Wrapped, Packed in Wooden Cabins
  • A213 Pipe(Alloy steel&Stainless steel)
    Keywords:a213 stainless pipe,a213 alloy pipe, astm213 pipe,a213 tubings
    Stainless steel:
    Material (ASTM):201 304 304L 309s 310s 316 316L 316TI 317L 321 904L S32205
    Size:Wall thickness 1.24 - 59.54 mm (SCH5S-XXS),Outer diameter 10.3 - 1219mm (1/8""- 48"")"
    Surface: Pickling , Polished , Hairline , Mirror
    Type: hot rolled ,cold rolled / cold drawn
    Alloy steel:
    Grade: T2, T5, T9, T11, T12, T91, T92
    Size:"Outside Diameter: 4 -127mm,Wall Thickness: 0.4-12.7mm,Length: 32m Max."
    Schedules:Schedules 40 through 160, STD, XS, XXS.
    Form :Round, Square, Rectangular, Hydraulic Etc
    Length :Single Random, Double Random & Cut Length.
  • A312 Pipe
    Type:Seamless or Welded
    Material:(ASTM)201 304 304L 309s 310s 316 316L 316TI 317L 321 904L S32205
    Standard:ASTM AISI DIN JIS GB EN
    Size:Wall thickness 1.24 - 59.54 mm (SCH5S-XXS),Outer diameter10.3 - 1219mm (1/8"- 48")
    Ends: Annealed, Pickling, Polished
    Surface: Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating
    Packing: Waterproof Paper Wrapped, Packed in Wooden Cabins
  • A333 Pipe
    Specifications:ASTM A333,ASME SA333
    sizes:1/2” Nominal to36”O.D.Wall Thickness – Schedule 10 through XXS,Thickness 3-12mm
    Schedules: SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
    TypeSeamless / ERW / Welded / Fabricated
    Standards ASTM, ASME and API
    Grade: A333 GR 1-11
    Form: Round, Hydraulic Etc
    Pipe Craft: Cold rolled and Cold drawn
    Pipe Length: Min 3 Meters, Max18 Meters, or according to customer’s requirement
    Pipe Tolerance: Cold drawn pipe: +/-0.1mm,Cold rolled pipe: +/-0.05mm
    End: Plain End, Beveled End, Treaded
  • A335 Pipe
    Sizes:NPS 1/2” to NPS 40”Wall Thickness – Schedules 10 through 160, STD, XS, XXS.
    Grade:P1, P2, P3, P9, P11,P12, P22, P91,P92
    Surface: oiled, black painted to prevent rust
    Length: 6 meters, 12 meters or customized.
    Pipe End:Beveled,Square,Threaded,Threaded and Coupled,Grooved
    ASTM Standards:ASTM A 335, and ASME SA 335
    Pipe Form:Round, Rectangular, Square, Hydraulic Etc.
    Length: Single, Double Random & Cut to Length.
    Suitable Pipe Fittings material:A234 WP5
  • A358 Pipe
    Grades: 304, 304L, 310S, 316, 316L, 316H, 317L, 321, 321H, 347, 347H, 904L
    Size:OD1/2"-36"
    Wall thickness:SCH10,20,30,STD,40,60,XS,80,100,120,140,160,XXS
    Classes(CL): CL1, CL2, CL3, CL4, CL5
    Pipe Ends:Plain Ends / Beveled Ends
    Specification:ASTM A358 / ASME SA358
    Finish:No.1 Pickled Finish, No.4 finish, BA Finish, Electropolished Seamless Pipe
    Length:Up to 6 meters, custom cut lengths
    Process Method:ERW , EFW etc
  • A500 Pipe
    Type:carbon steel, cold formed welded and seamless structural tube
    Sizes:1/2” Nominal to36”
    Wall thickness:SCH10,20,30,STD,40,60,XS,80,100,120,140,160,XXS
    Grade:GradeA,GradeB,GradeC,GradeD
    Forms:round, square, rectangular, and “special” shapes
    Surface Treatment:Plain, oiled, painted, galvanized, electro-static coating and so on.
    End: Plain End, Beveled End, Treaded
    Length: Single Random, Double Random & Required Length, Custom Size
    Usage:StructuraSupports,Building columns,Highway Signs,Oil Field Services,Communication Towers
  • A671/672 Pipe
    Specification:Plain Carbon steel grades:CA 55, CB 60,CB 65,CB 70 CC 60,CC 65,CC 70
    Nickel steel grades: CF 65,CF 70,CF 65,CF 70
    Alloy steel grades:CJA 115, CJB 115,CJE 115,CJF 115,CJH 115,CJP 115"
    Sizes:O.D:1/2"-40"(21..3-1016mm
    Wall thickness: SCH10,20,30,STD,40,60,XS,80,100,120,140,160,XXS
    CLASS:10, 11, 12, 13, 20, 21, 22, 23, 30, 31, 32, 33, 40, 41, 42
    Coating: Epoxy Coating / Colour Paint Coating / 3LPE Coating.
    Standards:ASTM A671 /ASME SA671,ASTM A672 /ASME SA672
    Length: Single Random, Double Random & Required Length, Custom Size
    Types:ASTM A 672 GR. B55,B60,B65,B70,C55,C60,C65,C70
  • Color Coated Coils
    Standard:ASTM/JIS/GBT/EN etc Steel Grade:SGCC, DX51D, S250GD, S550GD etc Thickness: 0.12mm ~ 2.0mm Width: 600mm ~ 1500mm Top paint/back paint: 5+15μm/7-9μm or 5+20μm/10-12μm or as per client’s needs Zinc coating: Z30 ~ Z275 Color: Any color as per client’s needs Coil ID: 508mm/610mm Coil weight: as per client’s needs Pack:vertical or horizontal package
  • Nickel Alloy Bar
    Name:nickel alloy bar,nickel alloy rod Technique:Hot Rolled / Cold Rolled/ Cold Drawn/ Annealed Standard:AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. Alloy Grade Monel series: 400 K500 Inconel series: 600 601 625 718 725 Incoloy series: 800 800H 825 925 Hastelloy series: B,B2,B3,C,C-276,C-4,C-22 Pure: Ni200, Ni201 Length:1000mm, 3000mm, 6000mm or customized Diameter:10mm,20mm,30mm,50mm as request Service:OEM, customized processing service Processing Type:Cutting,bending,stamping,welding Cutting Type:Laser cutting;water-jet cutting;flame cutting Packing:Standard export seaworthy package

HOT PRODUCT

QUICK LINKS

CONTACT US

  Hunan Gaoxing Steel Development Zone, No.1888 Purui South Rd, Wangcheng District,Changsha, Hunan, China

  0086-187-7406-7534

  inquiry@threewaysteel.com

Copyright  2020 Threeway Steel Co.,Ltd. All Rights Reserved

PRODUCT INQUIRY