Views: 8
Overview of inconel products
A nickel-chromium alloy with good oxidation resistance at higher temperatures. With good resistance in carburizing and chloride containing environments. Our inconel is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable.inconel products are available in inconelform of pipes,tubes,sheets,plates,coils,forged fittings,buttweld fittings,flanges,fasteners,bars and rods etc.
Inconel Grades (Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 718, Inconel 800, Inconel 825)
Inconel 600 (UNS No. N06600)
Inconel600 alloy is a nickel-chromium-iron-based solid solution strengthened alloy. It has good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding properties, and has satisfactory thermal strength and high plasticity below 700°C.
The alloy can be strengthened by cold working, and it can also be connected by resistance welding, melt welding or brazing. It is suitable for making anti-oxidation parts that can withstand low loads below 1100°C.
Equivalent Material of Inconel 600 pipe
Grade | UNS No. | Old British | Euronorm | China GB | Japanese JIS | ||
BS | EN | No. | Name | ||||
Inconel 600 | UNS N06600 | 2.4816 | NiCr15Fe | GH600 | NCF600 | ||
Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Cu | Ni | Fe | |
Inconel 600 | Min. | / | / | / | / | / | 14.00 | / | 72.00 | 6 |
Mechanical Characteristics
Grade | Tensile Strength | Yield Strength | Elongation | Hardness | |
Rockwell B | Brinell | ||||
Inconel 600 | 550 | 245 | 30 | 182 | 179 |
UNS: | N06600 |
Specifications: | ASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163, ASTM B516, ASTM B751, AMS 5580 |
International Specifications: | BS 3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4816 TÜV 305 AFNOR-NC 15 Fe |
Inconel 601 (UNS No. N06601)
Inconel 601®is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601®also has high strength and good workability. Inconel 601®can be hardened and strengthened only by cold work. Inconel 601®can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays.
Inconel 601 Chemical Composition
Inconel 601 | Ni | Fe | Cr | S | Al | C | Mn | Si | Cu |
58.0 – 63.0 | Balance | 0.10 max | 21.0 – 25.0 | 0.015 max | 1.0 – 1.7 | 1.0 max | 0.5 max | 1.0 max |
Equivalent Standard
STANDARD | BS | GOST | EN | OR | WERKSTOFF NR. | UNS | JIS | AFNOR |
Inconel 601 | NA 49 | XH60BT | NiCr23Fe | ЭИ868 | 2.4851 | N06601 | NCF 601 | NC23FeA |
PIPE (Inconel 601®) standards
UNS: | N06601 |
Specifications: | ASTM B167, ASTM B751, ASTM B775, ASTM B829 |
International Specifications: | DIN 17751, ISO 6207, WERKSTOFF Nr 2.4851 |
Inconel 617 (UNS No. NO6617)
Inconel 617®consists of nickel-chromium-cobalt and – molybdenum. These elements make Inconel 617®highly resistant to oxidation and carburization. Inconel 617®can be easily fabricated; it can be hot formed up to 2200º F, and cold formed at 1900º F. Inconel 617®has excellent weld ability. Inconel 617®is used for ducting, transition liners in both aircraft and land based gas turbines, and combustion cans.
Inconel 617 Pipes & Tubing Chemical Specification
Grade | C | Mn | Si | S | Cr | Mo | Ni | Cu | Ti | Al | B | Co | Fe |
Inconel 617 | 0.05-0.15 | 1.0 Max | 1.0 Max | 0.015 Max | 20.0-24.0 | 8.0-10.0 | 44.5 Min | 0.5 Max | 0.6 Max | 0.8-1.5 | 0.006 Max | 10.0-15.0 | 3.0 Max |
Alloy 617 Pipe and Tubes Mechanical Specification
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 617 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Inconel 617 Pipes & Tubes Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS |
Inconel 617 | 2.4663 | N06617 |
Inconel 625 (UNS No. N06625)
Inconel®625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix.
Chemical Requirements
Chemical Requirements | |||||||
Ni | Fe | Cr | Si | Mo | Mn | C | |
Max | 5.0 | 23.0 | 0.50 | 10.0 | 0.50 | 0.10 | |
Min | 58.0 | 20.0 | 8.0 | ||||
Equivalent
UNS: | N06625 |
Specifications: | ASTM B444, ASTM B751, ASTM B829, ASTM B775, ASTM B705, ASTM B704, AMS 5581 |
International Specifications: | ISO 6207, VdTüV 499, BS 3074NA21, DIN 17751, WERKSTOFF Nr 2.4856 |
Inconel 718 (UNS No. NO7718)
718 Inconel Alloy Pipes Chemical Composition
Grade | C | Mn | Si | Fe | S | Cr | Al | Ni | |
718 | min. | – | – | – | bal | – | 17.0 | 0.2 | 50.0 |
max. | 0.08 | 0.35 | 0.35 | bal | 0.01 | 21.0 | 0.8 | 55.0 | |
Inconel Alloy 718 Pipe Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
718 | 8.14 g/cm3 | 1400°C 2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Equivalent Grades for 718 Inconel Pipe
Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
BS | En | No | AFNOR | ||||
Inconel 718 | N07718 | – | – | 2.4668 | – | – | – |
Inconel 800 (UNS No. N08800)
Inconel @ alloy 800 is a widely used material of construction for equipment that must have high strength and resist carburizing ,oxidation and other harmful effects of high-temperature exposure. (For high temperature applications requiring optimum rupture and creep properties, Inconel@alloys 800H and 800HT@ are used). The chromium in the alloy imparts resistance to oxidation and corrosion. The high percentage of nickel maintains an austenitic structure so that the alloy is ductile. the nickel content also contributes general corrosion, resistance to scaling and stress-corrosion cracking. Inconel@ alloy 800 is used in a variety of applications involving exposure to high temperatures and corrosive environments. It is used for heat-treating equipment such as baskets, trays and fixtures. In chemical and petrochemical processing the alloy is used for heat exchanger and other piping systems in nitric acid media especially where resistance to chloride stress-corrosion cracking is required. In nuclear power plants, it is used for steam-generator tubing.
800/ 800H/ 800HT Incoloy Alloy Pipes Chemical Composition
Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
800 | min. | – | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
800H | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
800HT | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 | |
Incoloy Alloy 800/ 800H/ 800HT Pipe Mechanical Properties
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
800-H-HT | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 | – | – |
Inconel 825 (UNS No. N08825)
Inconel alloy 825 is a nickel-iron-chromium alloy with additions of copper, molybdenum and titanium. The alloy's chemical composition is designed to provide exceptional resistance to many corrosive environment. The nickel content is sufficient for resistance to chloride-ion stress corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids. the molybdenum also aids resistance to crevice corrosion. The alloy's chromium content confers resistance to a variety of oxidizing substances such as nitrates, nitrogen acid and oxidizing salts. The titanium addition serves, with an appropriate heat treatment, to stabilize the alloy against sensitization to inter granular corrosion. The resistance of Inconel 825 to general and localized corrosion under diverse conditions gives the alloy broad usefulness. Applications include chemical processing, pollution control, oil and gas recovery, acid production, pickling operations, nuclear fuel reprocessing and handling of radioactive wastes
Chemical Composition
Grade | C | Mn | Si | Fe | S | Cr | Cu | Ti | |
825 | min. | – | – | – | 22.0 | – | 19.5 | 1.5 | 0.6 |
max. | 0.05 | 1.0 | 0.5 | – | 0.015 | 23.5 | 3.0 | 1.2 | |
Mechanical Characteristics
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
825 | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa –220 | 30 | – | – |
Equivalent
Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
BS | En | No | AFNOR | ||||
Incoloy 825 | N08825 | NA 16 | NiCr21Mo | 2.4858 | NFE30C20DUM | ЭП703 | NCF 825 |
Hunan Gaoxing Steel Development Zone, No.1888 Purui South Rd, Wangcheng District,Changsha, Hunan, China
Tel: 0086-0731-88739521
