Surface defect detection of rectangular tube:Rectangular tube surface defects may include surface scratches, burrs, and oxide scale, etc. The surface defect detection methods for rectangular tube usually include visual inspection, touch inspection, eddy current inspection, X-ray inspection, and othe

To protect carbon steel pipes from rust and corrosion, the following steps can be taken:1. Surface Preparation: The surface of the carbon steel pipes should be cleaned thoroughly to remove dirt, grease, and rust. This can be done by using a wire brush, sandpaper, or abrasive blasting.2. Primer Appli

Most merchants did not use the straight seam steel pipe soon after purchasing it. So is there anything we need to pay attention to in the storage of straight seam steel pipes? The staff of the straight seam steel pipe manufacturer reminded us that the correct storage method of the straight seam stee

1. Appearance inspection: Check the pipe joints for obvious cracks, corrosion, deformation, wear or other defects that may affect their performance.2. Pressure test: Test the pipe joint under the specified pressure to verify whether it can withstand the expected working pressure.3. Leak detection: U

Some common problems with resistance welding include:1. Overheating: This occurs when excessive heat is generated during the welding process, leading to damage or distortion of the welded parts.2. Electrode wear: Frequent use of electrodes can cause the tips to wear out, resulting in inconsistent we

The ERW pipe flaw detection method mainly includes magnetic testing, ultrasonic testing, and visual inspection. Among them, magnetic testing is the most commonly used method, which can detect internal and external flaws of the pipe through magnetic induction and magnetic flux measurement. Ultrasonic

Choosing between spiral pipes and seamless pipes depends on your specific needs and requirements. Here's a brief comparison between spiral pipes and seamless pipes:Spiral pipes:* Made from steel or other materials, they are generally cheaper than seamless pipes.* Available in various diameters and w

Press-fit coated carbon steel pipe for fire protection is a type of piping system that is commonly used in fire sprinkler systems and fire protection applications. It consists of carbon steel pipes that are coated with a layer of corrosion-resistant material, such as epoxy or polymer, to enhance the

There are several measures that can be taken to prevent welded pipe leakage:1. ENSURE HIGH-QUALITY MATERIALS: Use high-quality pipes and fittings that are resistant to corrosion and have high weldability. This will ensure the integrity of the weld and reduce the chances of leakage.2. PROPER PIPE PRE

The welding of Oil Country Tubular Goods (OCTG) casing involves several steps to ensure a strong and leak-free joint. Here are the measures typically taken during the welding process:1. PREPARATION: Clean the ends of the casing pipes thoroughly to remove any dirt, rust, or contaminants. Ensure the p